1st Edition
Effective Building Mixtures for 3D Printing
Preface
1. Construction Mixtures for 3D Printing
Analysis of Existing Technological Solutions for the Application of 3D Printing in Construction
Basic Properties and Test Methods of Mixtures for 3D Concreting
2. Modified Ash-Containing Construction Mixtures for 3D Printing
Technological Properties of Cement-ash Modified Mortar Mixtures
Adhesion Properties of Modified Cement-ash Mortars
Strength and Deformation Properties of Cement-ash Mortars
Corrosion Resistance of Modified Mortars
Optimization of Technological Parameters for Obtaining Modified Cement-ash Solutions
3. Mixtures Based on Cement-Slag Binder with Modifying Additives
Mixtures Based on Cement-slag Binder with Hardening Accelerator Additive
Clinker Kiln Dust Removal: An Active Component of Cement-slag Binder Systems
Rheological and Structural-mechanical Properties of Aqueous Pastes in Dustslag-superplasticizer and Dust-slag-cement-superplasticizer Systems
The Influence of Composition and Specific Surface Area of Composite Binders on Their Strength
The Influence of the Composition of Dry Mixes Containing Clinker Kiln Dust on the Properties of Building Mortars
Technological Properties of Mortar Mixtures
Porous Mixtures on Cement-slag Binder with Ash and Hardening Accelerator Additives
4. Mixtures Based on Gypsum-Cement-Pozzolan Binders
Gypsum-containing Mixtures for 3D Printing
Gypsum-containing Porous Fiber-reinforced Mortars
References
Biography
Leonid Dvorkin DSc (1983), Full Professor since 1985. Head of Constructing Products Technology and Material Science Department, National University of Water and Environmental Engineering, Ukraine. Published more than 40 monographs and textbooks on actual problems in technology of binders, concrete and other constructing material. Published many scientific papers and presented research reports at national and international conferences.
Marchuk V. is a Candidate of Technical Sciences, Associate Professor of the Department of Construction Products Technology and Materials Science of the National University of Water and Environmental Engineering (Ukraine), author of many scientific works devoted to current problems of concrete technology.
